Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free,White
Highlighted Features
- A genuine Rule product, don't settle for anything
- Year after year, the Rule-A-Matic has been the switch of choice for boaters the world
- Switch is removable from the base for easy
- Completely sealed metal capsules enhance flawless
- A mercury free snap switch tested to over one million
- Marine grade "blocked" wire
Features
Information
- Best Choice - #1 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 55 Reviews
Rule 40A Rule-A-Matic Plus Bilge Pump Float Switch, 12, 24 or 32 Volt, Moisture Tight Seals , White , Small
Highlighted Features
- Sleek and rugged with a strong, fully integrated impact resistant cover to protect against debris and
- 14 gauge highly abrasive resistant marine grade
- Built-in test feature
- Designed for pumps drawing up to 20
- Will turn the pump on when the water level reaches 2" (51mm) and will turn the pump off when water level falls to 3/4"
- Can also be used to operate high water alarm
Features
Information
- Best Choice - #2 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 68 Reviews
Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury
Highlighted Features
- Max Amps 12volts: 20A; Max Amps 24volts: 10A; Max Amps 32volts: 8A. Wire Length: 1M; Wire gauge size:
- Switch is removable from the base for easy
- Turn pump on when water level reaches 2” (51mm) ; Turn pump off when water level reaches 0.7”
- Long life, switching frequency up to 10 million times; Ultrasonic welding, forming a seal, reliable and secure, not
- Heavy duty flow switch is designed for the toughest applications; Environmentally
Features
Information
- Best Choice - #3 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 85 Reviews
MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue - Automatic)
Highlighted Features
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M):
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8"); Width: Approx.
- Built-in float switch! (No separate float switch is
- No power use until pump is activated by internal float switch (when water level
- Equipped with built in electronic controlled reed sensor system for easy fully automatic
Features
Information
- Best Choice - #4 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 75 Reviews
Boat Bilge Water Pump 12 V 1100 GPH Electric Marine Bilge Pump and Automatic Boat Bilge Pump Float Switch 12 V 24 V 32 V for Boats, 2 Pieces in Total
Highlighted Features
- What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you
- Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft
- Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently; It is a good
- Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will
- Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and most marine, RV, etc.; And it can also
Features
Information
- Best Choice - #5 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 99 Reviews
SEACHOICE 19401 Universal Series Automatic Marine Bilge Pump Float Switch for 6V-36V - 50-19401
Highlighted Features
- Converts DC bilge pumps to automatic
- 2,000 gallon per hour
- 36 Volts Strength
- Non-corrosive ABS plastic
Features
Information
- Best Choice - #6 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 40 Reviews
PetierWeit Heavy Duty Flow Marine Boat Bilge Pump Float Switch can be used in Large Aquarium / Small swimming pool / Water Reservoirs / Fountains
Highlighted Features
- Wire Length: 1M; Wire gauge size: 18AWG, N.W/N.W:
- Turn pump on when water level reaches 2" ; Turn pump off when water level reaches
- Switcheing frequency up to 10 million times; The switch is removable from the base for easy
- Turn on/off points are consistent and the float pivots
- Can be widely used in water sampling, high-volume liquid transfer, low-noise continuous workplace; Large aquarium, small swimming pool, water reservoirs, fountains
Features
Information
- Best Choice - #7 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 98 Reviews
Rule 40FA Rule-A-Matic Plus Bilge Pump Float Switch with Fuse Holder, 12, 24 or 32 Volt, Moisture Tight Seals , White , 3" x 5-3/8" x 2-1/2"
Highlighted Features
- Sleek and rugged with a strong, fully integrated impact resistant cover to protect against debris and
- 14 gauge highly abrasive resistant marine grade
- Built-in test feature
- Designed for pumps drawing up to 20
- Will turn the pump on when the water level reaches 2" (51mm) and will turn the pump off when water level falls to 3/4"
- Can also be used to operate high water alarm
Features
Information
- Best Choice - #8 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 11 Reviews
AURELIO TECH Automatic Boat Bilge Pump Float Switch 12V 24V 32V Ignition protected Mercury
Highlighted Features
- Model: SFBS-20-01; 20AMP 12-24-34V
- Max Amps 12volts: 20A; Max Amps 24volts: 10A; Max Amps 32volts:
- Wire Length: 1m; Wire gauge size:
- Product dimensions: 5" x 1. 9" x 2" approx. ; Ignition protected; Mercury free; Solid ABS material for high strength and
- Long life, switching frequency up to 10 million times; Ultrasonic welding, forming a seal, reliable and secure, not
Features
Information
- Best Choice - #9 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 33 Reviews
AMRM-36152 Mayfair Electro-Magnetic Bilge Pump Float Switch
Highlighted Features
- Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float
- False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to
- Activates pump at 2" water level, deactivates pump at 3/4" water
- 12V. Handles up to 15 amps.
Features
Information
- Best Choice - #10 Best Bilge Pump Float Switch
- Checked on 23/05/2024
- Based on 28 Reviews